4-Way Amplified Satellite Radio Signal Splitter (Model SR-4)

Operate up to Four Satellite Radios from a Single Antenna. Amplified 4-Way Splitter Kit. (Model SR-4) This amplified splitter is optimized for use with all satellite radio systems. It includes the adapters and accessories to permit operation of multiple satellite radios from a single antenna. In order to maintain the proper RF link budget for the radio, the splitter loss at 2.35 GHz has been compensated by an internal amplifier. This amplifier is powered by the DC voltage that is supplied by any of the radios connected to its output. The splitter will pass the DC voltage supplied by a radio at any output port to the splitter input port. This will provide power to any antenna connected to this port for the antennas internal low-noise amplifier (LNA). Standard RG-6 cable with male F-connectors (not included) can be used to extend the output cable lengths. The splitter has 8dB of excess gain to permit output extensions of up to 70 feet. If cable extensions greater than 70 feet are desired, we recommend using Pixel Model: SBA-1 line amplifier(s) with the splitter. One amplifier (for example) placed at the input of the splitter will permit total cable lengths up to 150 feet from each individual output port to the radios. Unused output ports do not have to be terminated for proper operation. Kit includes: (1) Amplified 4-way splitter. (4) 3 ft. F-female to SMB-plug connector cables. (4) F-male to F-male couplers. (1) SMB-jack to F-male adapter. (1) 20 dB attenuator (for attenuating high power repeater signals)

• Operate up to Four Satellite Radios from a Single Antenna

• Amplified For No Signal Loss

• Includes all Required Adaptors and Cables to Mate With Antenna and Radios

• Compatible with Standard RG-6 Cable

• Works with XM or Sirius Radios